class ImageToImageClient
All setter methods return ImageToImageClient object unless specified otherwise.
Constructor
function __construct($user_name, $api_key)
Constructor for the Pdfcrowd API client.
user_name
Your username at Pdfcrowd.
function convertUrl($url)
Convert an image.
url
The address of the image to convert.
The supported protocols are http:// and https://.
Returns
-
byte[] - Byte array containing the conversion output.
function convertUrlToStream($url, $out_stream)
Convert an image and write the result to an output stream.
url
The address of the image to convert.
The supported protocols are http:// and https://.
out_stream
The output stream that will contain the conversion output.
function convertUrlToFile($url, $file_path)
Convert an image and write the result to a local file.
url
The address of the image to convert.
The supported protocols are http:// and https://.
file_path
The output file path.
function convertFile($file)
Convert a local file.
file
The path to a local file to convert.
The file must exist and not be empty.
Returns
-
byte[] - Byte array containing the conversion output.
function convertFileToStream($file, $out_stream)
Convert a local file and write the result to an output stream.
file
The path to a local file to convert.
The file must exist and not be empty.
out_stream
The output stream that will contain the conversion output.
function convertFileToFile($file, $file_path)
Convert a local file and write the result to a local file.
file
The path to a local file to convert.
The file must exist and not be empty.
file_path
The output file path.
function convertRawData($data)
Convert raw data.
data
The raw content to be converted.
Returns
-
byte[] - Byte array with the output.
function convertRawDataToStream($data, $out_stream)
Convert raw data and write the result to an output stream.
data
The raw content to be converted.
out_stream
The output stream that will contain the conversion output.
function convertRawDataToFile($data, $file_path)
Convert raw data to a file.
data
The raw content to be converted.
file_path
The output file path.
function convertStream($in_stream)
Convert the contents of an input stream.
in_stream
The input stream with source data.
Returns
-
byte[] - Byte array containing the conversion output.
function convertStreamToStream($in_stream, $out_stream)
Convert the contents of an input stream and write the result to an output stream.
in_stream
The input stream with source data.
out_stream
The output stream that will contain the conversion output.
function convertStreamToFile($in_stream, $file_path)
Convert the contents of an input stream and write the result to a local file.
in_stream
The input stream with source data.
file_path
The output file path.
The format of the output file.
Image Operations
Settings used for operations with images.
function setResize($resize)
Resize the image.
resize
The resize percentage or new image dimensions.
Default: 100%
Examples:
-
setResize("200%")
-
setResize("1024x768")
function setRotate($rotate)
Rotate the image.
rotate
The rotation specified in degrees.
Default: 0
function setCropAreaX($x)
Set the top left X coordinate of the content area. It is relative to the top left X coordinate of the print area.
x
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: 0px
Examples:
-
setCropAreaX("-1in")
-
setCropAreaX("2.5cm")
function setCropAreaY($y)
Set the top left Y coordinate of the content area. It is relative to the top left Y coordinate of the print area.
y
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: 0px
Examples:
-
setCropAreaY("-1in")
-
setCropAreaY("2.5cm")
function setCropAreaWidth($width)
Set the width of the content area. It should be at least 1 inch.
width
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: The width of the print area.
Examples:
-
setCropAreaWidth("8in")
-
setCropAreaWidth("25cm")
function setCropAreaHeight($height)
Set the height of the content area. It should be at least 1 inch.
height
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: The height of the print area.
function setCropArea($x, $y, $width, $height)
Set the content area position and size. The content area enables to specify the part to be converted.
x
Set the top left X coordinate of the content area. It is relative to the top left X coordinate of the print area.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: 0px
y
Set the top left Y coordinate of the content area. It is relative to the top left Y coordinate of the print area.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: 0px
width
Set the width of the content area. It should be at least 1 inch.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: The width of the print area.
height
Set the height of the content area. It should be at least 1 inch.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Default: The height of the print area.
function setRemoveBorders($value)
Remove borders of an image which does not change in color.
value
Set to true to remove borders.
Default: false
Canvas Setup
function setCanvasSize($size)
Set the output canvas size.
size
Allowed values:
-
A0
-
A1
-
A2
-
A3
-
A4
-
A5
-
A6
-
Letter
function setCanvasWidth($width)
Set the output canvas width.
width
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setCanvasWidth("300mm")
-
setCanvasWidth("9.5in")
function setCanvasHeight($height)
Set the output canvas height.
height
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
function setCanvasDimensions($width, $height)
Set the output canvas dimensions. If no canvas size is specified, margins are applied as a border around the image.
width
Set the output canvas width.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
height
Set the output canvas height.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setCanvasDimensions("300mm", "350mm")
-
setCanvasDimensions("9.5in", "15.25in")
-
setCanvasDimensions("372mm", "520pt")
function setOrientation($orientation)
Set the output canvas orientation.
orientation
Default: portrait
function setPosition($position)
Set the image position on the canvas.
position
Allowed values:
-
center
-
top
-
bottom
-
left
-
right
-
top-left
-
top-right
-
bottom-left
-
bottom-right
Default: center
function setPrintCanvasMode($mode)
Set the mode to print the image on the canvas.
function setMarginTop($top)
Set the output canvas top margin.
top
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setMarginTop("1in")
-
setMarginTop("2.5cm")
function setMarginRight($right)
Set the output canvas right margin.
right
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setMarginRight("1in")
-
setMarginRight("2.5cm")
function setMarginBottom($bottom)
Set the output canvas bottom margin.
bottom
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setMarginBottom("1in")
-
setMarginBottom("2.5cm")
function setMarginLeft($left)
Set the output canvas left margin.
left
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
Examples:
-
setMarginLeft("1in")
-
setMarginLeft("2.5cm")
function setMargins($top, $right, $bottom, $left)
Set the output canvas margins.
top
Set the output canvas top margin.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
right
Set the output canvas right margin.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
bottom
Set the output canvas bottom margin.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
left
Set the output canvas left margin.
The value must be specified in inches "in", millimeters "mm", centimeters "cm", pixels "px", or points "pt".
function setCanvasBackgroundColor($color)
The canvas background color in RGB or RGBA hexadecimal format. The color fills the entire canvas regardless of margins. If no canvas size is specified and the image format supports background (e.g. PDF, PNG), the background color is applied too.
color
The value must be in RRGGBB or RRGGBBAA hexadecimal format.
Examples:
-
red color
setCanvasBackgroundColor("FF0000")
-
green color
setCanvasBackgroundColor("00ff00")
-
green color with 50% opacity
setCanvasBackgroundColor("00ff0080")
Set the DPI resolution of the input image. The DPI affects margin options specified in points too (e.g. 1 point is equal to 1 pixel in 96 DPI).
dpi
The DPI value.
Default: 96
Miscellaneous
function setDebugLog($value)
Turn on the debug logging. Details about the conversion are stored in the debug log. The URL of the log can be obtained from the
getDebugLogUrl method or available in
conversion statistics.
value
Set to true to enable the debug logging.
Default: false
function getDebugLogUrl()
Get the URL of the debug log for the last conversion.
Returns
-
string - The link to the debug log.
function getRemainingCreditCount()
Get the number of conversion credits available in your
account.
This method can only be called after a call to one of the convertXtoY methods.
The returned value can differ from the actual count if you run parallel conversions.
The special value
999999 is returned if the information is not available.
Returns
-
int - The number of credits.
function getConsumedCreditCount()
Get the number of credits consumed by the last conversion.
Returns
-
int - The number of credits.
Get the job id.
Returns
-
string - The unique job identifier.
Get the size of the output in bytes.
Returns
-
int - The count of bytes.
Get the version details.
Returns
-
string - API version, converter version, and client version.
Tag the conversion with a custom value. The tag is used in
conversion statistics. A value longer than 32 characters is cut off.
tag
A string with the custom tag.
function setHttpProxy($proxy)
A proxy server used by Pdfcrowd conversion process for accessing the source URLs with HTTP scheme. It can help to circumvent regional restrictions or provide limited access to your intranet.
proxy
The value must have format DOMAIN_OR_IP_ADDRESS:PORT.
function setHttpsProxy($proxy)
A proxy server used by Pdfcrowd conversion process for accessing the source URLs with HTTPS scheme. It can help to circumvent regional restrictions or provide limited access to your intranet.
proxy
The value must have format DOMAIN_OR_IP_ADDRESS:PORT.
API Client Options
function setConverterVersion($version)
Set the converter version. Different versions may produce different output. Choose which one provides the best output for your case.
Availability:
API client >= 5.0.0.
See
versioning.
version
The version identifier.
Allowed values:
-
24.04
Version 24.04.
-
20.10
Version 20.10.
-
18.10
Version 18.10.
Default: 24.04
function setUseHttp($value)
Specifies if the client communicates over HTTP or HTTPS with Pdfcrowd API.
value
Set to true to use HTTP.
Default: false
Warning
Using HTTP is insecure as data sent over HTTP is not encrypted. Enable this option only if you know what you are doing.
function setUserAgent($agent)
Set a custom user agent HTTP header. It can be useful if you are behind a proxy or a firewall.
agent
The user agent string.
Default: pdfcrowd_php_client/6.3.0 (https://pdfcrowd.com)
function setProxy($host, $port, $user_name, $password)
Specifies an HTTP proxy that the API client library will use to connect to the internet.
function setUseCurl($value)
Use cURL for the conversion request instead of the file_get_contents() PHP function.
value
Set to true to use PHP's cURL.
Default: false
function setRetryCount($count)
Specifies the number of automatic retries when the 502 or 503 HTTP status code is received. The status code indicates a temporary network issue. This feature can be disabled by setting to 0.
count
Number of retries.
Default: 1